SANCO Sun T Double insulation glass
| Glass type | Glass structure | Ug-value to DIN EN 673 | Light transmission to DIN EN 410 | Total energy transmittance to DIN EN 410 | Light reflection outside to DIN EN 410 |
|---|---|---|---|---|---|
| mm | W/m²K | LT % (±2) | g-value % (±2) | LR % (±2) | |
| SANCO Sun Neutral 50 T | 6 - 16AR - 4 | 1.1 | 46 | 38 | 13 |
| SANCO Sun Blue 50 T | 6 - 16AR - 4 | 1.1 | 44 | 36 | 21 |
| SANCO Sun Blue 30 T | 6 - 16AR - 4 | 1.1 | 27 | 23 | 28 |
| SANCO Sun Silver 20 T | 6 - 16AR - 4 | 1.1 | 18 | 17 | 28 |
| SANCO Sun WHITESHINE T | 6 - 16AR - 4 | 1,1 | 59 | 49 | 35 |
SANCO Sun Triple insulation glass
| Glass type | Glass structure | Ug-value to DIN EN 673 | Light transmission to DIN EN 410 | Total energy transmittance to DIN EN 410 | Light reflection outside to DIN EN 410 |
|---|---|---|---|---|---|
| mm | W/m²K | LT % (±2) | g-Wert % (±2) | LR % (±2) | |
| SANCO Sun WHITESHINE T | 4 - 14AR - 4 - 14AR - 4 | 0,6 | 54 | 42 | 36 |
AR = Argon, T = thermally toughened due to high absorption
SANCO Sun coating on item 2, SANCO thermal insulation coating on item 3 with 2-layer insulating glass, on items 2 and 5 with 3-layer insulating glass.
Technical values were computed using glaCE. Ug-value according to DIN EN 673 for vertical installation determined.
For dimensional tolerances and production possibilities see SANCO Tolerance Manual and in consultation with the respective manufacturer.
Attention! By changing the glass thicknesses and interpane spaces, the technical values change.
Excerpt from the total production range, further models on request.
The technical data listed here conforms to the current values at the time of going to print and can alter without prior notice. The technical values are based on the suppliers’ information or were ascertained in the course of tests by an independent testing institution in accordance with the respectively valid standards. The function values are based only on test specimens in the dimensions provided for testing. No further guarantee for technical values shall be accepted, in particular if tests are performed in other installation situations or if subsequent measurements are obtained in the building. During installation, the current version of the SANCO glazing guidelines must be followed without fail. Date: 05/2019
